Getinge Lancer Ultima Washer/Dryers are designed to deliver reliable and repeatable cleaning of glassware and utensils while maximizing valuable floor space in your laboratory.
The most common racks are interchangeable between wash levels.
All racks can be used with the 810 LX, 815 LX, and 820 LX models  Undercounter Washers, and the 910 LX, 1300 LX and 1800 LXA models of Freestanding Washers, minimizing the need for additional accessories. A user-friendly, icon-based interface features 5 preset programs for easy operations and setup. 

 

Optimize cleaning performance

The Laboratory Undercounter Washer/Dryers are designed for optimal cleaning performance in space-limited laboratories. The hydraulic systems deliver a direct fluid path to each individual rack, maximizing water flow and pressure.












 

Complete water coverage for comprehensive cleaning

Get complete coverage of both the exterior and interior of your laboratory glassware. Pressurized top and bottom stainless steel spray arms combine with injector washing on two levels for a comprehensive clean.














 

Ensure consistent pressure and flow

A tight connection to the hydraulic circuit ensures consistent water pressure and flow on each wash level. Injector rack connections are strategically located in the rear of the chamber. The door pushes the racks against the circuit to form a secure connection.

Minimize environmental impact

Maximize cleaning performance while minimizing costs and environmental impact. Peristaltic pumps deliver accurate dosing of detergent and acid. Optional conductivity measurement ensures consistent processing.

APPLICATIONS

Labware free from contamination

Accuracy in laboratory experiments and tests is of critical importance to any lab. Availability of lab utensils and glassware free from residual chemicals and microbiological soils is therefore essential. Equipment used for reprocessing of labware must deliver reliable, repeatable results for a wide variety of lab applications, space and workflow settings.

With each lab’s unique settings and challenges in mind, Getinge can support your lab operations with laboratory washers, sterilizers, chemicals and loading accessories to efficiently ensure contamination free experiments and tests.

Bioreactor Preparation Solution
Multi-Use Bioreactor Washing and Sterilization

The reproducibility of your work relies on a properly cleaned and sterilized bioreactor.
Getinge’s holistic approach to cleaning and sterilization of multi-use bioreactors ensures efficacy and repeatability.

• Automated washing using the purpose-built bioreactor wash rack sets the foundation for a highly reproducible system.
• Getinge’s integrated sterilization process allows three different types of loads in one cycle with ensured steam penetration into all components for improved quality assurance.

Together, the Getinge complete solution confirms accurate, repeatable results in less time with less labor so you can get back to what matters – your work.
 

Step 1: Applikon Bioreactor Systems
The Applikon multi-use bioreactor is used in academic, government and biopharmaceutical laboratories for benchtop research.

• Glass autoclavable bioreactors and fermenters are available in 2, 3, 5, 7, 15, and 20L (0.5gal to 5gal) total volume

• Programmable labware washer establishes a highly reproducible system, reduces labor, increases throughput and minimizes downtime.
• Getinge Lancer Ultima Series models are available in sizes ranging from 140L to 528L (4.9 cu.ft. to 18.7 cu.ft.).

• Accommodates three different types of loads, hard goods, tubing and liquid, in one cycle while removing all ambient air using a single pre-vacuum and multi-pulsed steam pressure.
• Getinge Laboratory Sterilizers includes models in sizes ranging from 130L to 1000L (4.6 cu.ft. to 35.3 cu.ft.).

• The design features an injector system to clean ports on the bioreactor headplate.
• Pre-validated cleaning performance ensures accurate and repeatable results

 

6 important steps in the cleaning and sterilization process

1. Determine if Repeat  or New Process
2. Disassembly and Washing Prep
3. Rack Loading, Washing and Reassembly
4. Preparation for Sterilization
5. Sterilization
6. Return to Service

A programmable labware washer with specialty multi-use bioreactor rack assures thorough cleaning, better reproducibility and reduced labor.

The Solution
The combination of pre-validated washing and sterilization performed in the washer and sterilizer maintain an approved standard for quality control that reduces the chance of human error or deviation from proven process.
 

810 LX
	Exterior Dimensions (WxHxD)	609 x 850 x 739 mm (24” x 33,5” x 29,1”)	The 810 LX is the entry level model in the undercounter range of laboratory washer/Dryers. It offers direct injection washing on two levels, and fits under standard casework to meet the budget and space requirements of many laboratories. The racks are interchangeable among the 810 LX, 815 LX, and 820 LX models of Getinge Lancer Ultima Undercounter Washers, and the 910 LX, 1300 LX and 1800 LXA models of Getinge Lancer Ultima Freestanding Washers, which limits the need for additional loading equipment when expanding the capacity of your lab.
	Chamber Dimensions (WxHxD)	535 x 498 x 520 mm (21,1” x 19,6” x 20,5”)
	Chamber Volume	140 L (4,9 cu.ft.)
	Weight	85 kg (187 lbs.)
	Sound Level	≤ 60 dB(A)
	Washing Levels	2
	Human Interface	Color touch screen 3,5”
	Controller	PROLUX - 40 Programs
	Drying	No

815 LX
	Exterior Dimensions (WxHxD)	609 x 850 x 739 mm (24” x 33,5” x 29,1”)	The 815 LX offers all the benefits of the 810 LX, plus chamber drying capabilities; forced air is blown into the chamber for quicker drying of processed glassware. The 815 LX individually connects each rack to the hydraulic circuit for two-level washing.
	Chamber Dimensions (WxHxD)	535 x 498 x 520 mm (21,1” x 19,6” x 20,5”)
	Chamber Volume	140 L (4,9 cu.ft.)
	Weight	85 kg (187 lbs.)
	Sound Level	≤ 60 dB(A)
	Washing Levels	2
	Human Interface	Color touch screen 3,5”
	Controller	PROLUX - 40 Programs
	Drying	NoChamber drying

820 LX
	Exterior Dimensions (WxHxD)	909 x 850 x 739 mm (35,8” x 33,5” x 29,1)	In addition to direct injection cleaning on two levels, the 820 LX provides complete drying coverage inside and outside of processed glassware. HEPA-filtered air is forced through both the chamber and injectors, ensuring complete drying in a quick overall cycle time. The 820 LX also offers onboard storage of chemicals within the frame of the washer for safe storage and protection from unnecessary handling.
	Chamber Dimensions (WxHxD)	535 x 498 x 520 mm (21,1” x 19,6” x 20,5”)
	Chamber Volume	140 L (4,9 cu.ft.)
	Weight	115 kg (254 lbs.)
	Sound Level	≤ 60 dB(A)
	Washing Levels	2
	Human Interface	Color touch screen 3,5”
	Controller	PROLUX - 40 Programs
	Drying	Dual System - chamber and injector drying