On-Line Total Organic Carbon Analyzer (Pure Water) | eTOC Series
Demands for highly purified water and quality control are growing in many industries such as pharmaceutical, medical device, food/beverage, chemical, precision machinery and semiconductor. Shimadzu's eTOC series of On-Line Total Organic Carbon Analyzers are designed to meet this demand.
It has very high sensitivity and low detection limits, reaching 0.1 µg/L, making it perfectly suitable for ultrapure water measurement.
Technology, usability and reliability: these are the defining features of the ultra-small, high-value eTOC.
The world's first technology with the smallest and lightest chassis A world first TOC analyzer using a mercury-free excimer lamp
Excimer lamps emit high-energy 172 nm wavelength light by inducing a dielectric barrier discharge within a xenon gas. The eTOC is the first TOC analyzer in the world to use a mercury-free excimer lamp.
The eTOC also features new “Active-Path” technology for transferring energy from the lamp to the sample. It efficiently irradiates the sample inside the lamp with ultraviolet light to reliably oxidize organic matter.
This new Shimadzu technology achieves both high measurement performance and high environmental performance.
Large indicator and display screen on a small cabinet
A smart user interface and the large touch-panel screen provide exceptional visibility and operability.
The indicator clearly shows the analyzer's status, such as standby, measurement in progress, or active warning.
There is no need to squint at a small monochrome screen or go to a separately located monitor or controller to confirm data and perform operations.
The simple configuration is designed to be maintenance-free for a year.
The only parts that need to be replaced during regular maintenance are the excimer lamp and pump head.
Both parts can be accessed via the front door of the analyzer and easily removed or installed without any tools.
Onsite calibration/validation using a vial sampler
Conditioned standard solutions are also available
Using an optional vial sampler, the analyzer can be calibrated or validated at the operating site.
The sampler can hold four standard solutions for creating up to four-point calibration curves.
Conditioned standard solutions, which are suitable for calibration, validation, or system suitability test, are also available.
The sampler and the conditioned solutions can make calibration and validation easier and more reliable.
View/Acquire data from a web browser through the network
By connecting eTOCs to a network, you can check results remotely from the web browser of a PC or tablet. No special software is required. Data can also be downloaded as a file.
Even if there are multiple analyzers in different locations, routine checking can be carried out from one place.
Web sitemizdeki çerezleri (cookie) kullanıcı deneyimini artıran teknik özellikleri desteklemek için kullanıyoruz. Aynı zamanda analitik çerezler de kullanıyoruz. Çerezleri reddetmek istiyorsanız detaylı bilgi için tıklayınız.
You are using an unsupported browser
Eski tarayıcılar güvenliğinizi riske atabilir, yavaş çalışır ve sitenin düzgün bir şekilde görüntülenmesine engel olabilir. Sitenin düzgün çalışabilmesi için modern bir tarayıcıya geçiş yapmanız gerekecek.